CODAN 3012 HF DATA MODEM

 CODAN 3012 HF DATA MODEM

  Hello folks, few days ago I bought a brand new CODAN 3012 HF DATA Modem. This is a my first experience with 3012 modem. I have 9001 and 9002 modems, but they are very old. 

 I tried old DOS software by CODAN (for DATA transmit) but it didn't work. Also tried CLOVER MAIL, Airmail, Alpha, RMS Express but still nothing. I would like to find any software for this 3012 modem, guys if someone has this software, please share it. 

Best Regards

Using the NGT series without CIB cable

 Hello dear friends. I had one NGT radio without CIB cable. I found very easy way to using the radio without CIB cable. I just removed 7 and 10 pin connectors and make the cables directly soldered. Also I disconnected FAN connector and this cable used for the speaker. it works very well!

Installation of the CODAN Envoy X1

 Here is a photo collage about instalation of the CODAN Envoy X1 into my Toyota Land Cruiser HZJ 105

 

 1) Installed Grounding Cable under the passenger seat:

 

 

2) Drilled holes and installed bracket of the RF Unit

 

 

3) Installed RF Unit:

4) Ground is Connected:

5) Started wiring:

 

6) extra cables rolled and hidden under bar:

 

 

7) Speaker has installed on the Ashtray

 

 

 

Thanks!

CODAN 3040 Antenna Tuner

 I would like to Introduce internal photos of the CODAN 3040 antenna tuner

How to program CODAN X2 HF SSB Transceiver

 

Tutorial: how to program old CODAN X2 SSB Transceiver. It's very easy!

Thank you for watching

Programing Cable for CODAN 93XX Series

 

 

 

      Hello, Here is a circuit diagram of programing cable for CODAN 93XX series. it works 100%.

 

 

The 7 pin male connector for CODAN 93XX series is very hard to find or very expensive. 

I just used a wires from DB9 connector, connected directly in pins of female connector.

 

also you can use a jumper wires from arduino or breadboards. 

Best Wishes.

Programing Cable for CODAN NGT Series

 Hello dear friends. Today i want to show you how to make a programing cable for CODAN NGT Series. All Codans of  NGT Series has 3.5 mm female stereo jack connector, bottom side of Handset. it's a RS-232 Programing port. Not need any converter or Programing interface. Why spend money in just cable with two connectors when you can make it with yourself and price be a very cheap.

 

Let's go, For cable what you need is next:

  1) DB-9 female connector

  2) Stereo audio cable with shield (I used a 2 meters lenght)

  3) audio 3.5 mm stereo Jack connector

Circuit looks like this:

 The handset has Programming port on the bottom side:

 

Just connect your handmade cable between handset and PC and Program it!

 

Best Wishes