Installation of the CODAN Envoy X1

 Here is a photo collage about instalation of the CODAN Envoy X1 into my Toyota Land Cruiser HZJ 105

 

 1) Installed Grounding Cable under the passenger seat:

 

 

2) Drilled holes and installed bracket of the RF Unit

 

 

3) Installed RF Unit:

4) Ground is Connected:

5) Started wiring:

 

6) extra cables rolled and hidden under bar:

 

 

7) Speaker has installed on the Ashtray

 

 

 

Thanks!

CODAN 3040 Antenna Tuner

 I would like to Introduce internal photos of the CODAN 3040 antenna tuner

How to program CODAN X2 HF SSB Transceiver

 

Tutorial: how to program old CODAN X2 SSB Transceiver. It's very easy!

Thank you for watching

Programing Cable for CODAN 93XX Series

 

 

 

      Hello, Here is a circuit diagram of programing cable for CODAN 93XX series. it works 100%.

 

 

The 7 pin male connector for CODAN 93XX series is very hard to find or very expensive. 

I just used a wires from DB9 connector, connected directly in pins of female connector.

 

also you can use a jumper wires from arduino or breadboards. 

Best Wishes.

Programing Cable for CODAN NGT Series

 Hello dear friends. Today i want to show you how to make a programing cable for CODAN NGT Series. All Codans of  NGT Series has 3.5 mm female stereo jack connector, bottom side of Handset. it's a RS-232 Programing port. Not need any converter or Programing interface. Why spend money in just cable with two connectors when you can make it with yourself and price be a very cheap.

 

Let's go, For cable what you need is next:

  1) DB-9 female connector

  2) Stereo audio cable with shield (I used a 2 meters lenght)

  3) audio 3.5 mm stereo Jack connector

Circuit looks like this:

 The handset has Programming port on the bottom side:

 

Just connect your handmade cable between handset and PC and Program it!

 

Best Wishes
 

CODAN Junction Box (JB Unit)

Hi Guys, if someone whants to know, what is a Junction box or What does this device do, See video:

Thank you

New CODAN 9360 with Free Tune Transceiver Mode

 Hello Codan lovers and codan fans! Merry Christmas and Happy new 2019th year!
this is my first post in 2019 year. i have very good news and i'm very very happy.

   bought a completly set of CODAN 9360. The radio included Power Supply 9114 Model and 9001 FAX & HIGH SPEED DATA Modem. Also included all cables, but microphone was damaged. i had saved old microphone and changed it. radio works very very well..

But It not was only that. I programmed radio with special Factory Software.
by Factory software is possible to enable or disable any additional options, which are fitted in radio, from factory (on building time). this software works if codan have 3.00 version firmware or higher. (mine had 4.00).

Here is Video: